Dye Test-Kits
New ATTO-Kits
ATTO-TEC offers five new kits with selected ATTO-dyes in a set. With specially adapted quantities per dye, initial experiments can be carried out to test and select the most suitable fluorophores for the intended applications.
The following ATTO-kits are available for this purpose:
Test Kits
The combination of three dyes with similar absorption and fluorescence wavelengths enables our customers to easily find the most suitable ATTO-dye for their (labeling) application in the corresponding excitation range. Some of the dyes differ in terms of charge and linker, which means that different performance in different applications can be determined quickly and easily. Likewise, due to the slightly different spectral characteristics of the three dyes included, an optimized selection of the most suitable fluorophore can be made based on the filter sets or other device-specific parameters, e.g. in multiplexing applications, in order to minimize cross-talk and/or bleed-through or to enable the most effective excitation and/or detection.
The advantage of the kits on offer, which each contain a sufficient quantity of the three dyes to carry out several test reactions or experiments, is their lower price compared to ordering the three ATTO-dyes individually.
We offer four kits for the wavelength ranges of 500 nm, 550 nm, 600 nm and 640 nm, each containing 0.5 mg of amine-reactive derivative (NHS ester) of three well-known and proven ATTO dyes.
The kits are as follows:
Spectral Kit
We have also put together an “ATTO Spectral Kit” containing five hydrophilic ATTO-dyes with absorption maxima in the wavelength range of 500 nm - 700 nm, thus covering the visible spectral range. These dyes are particularly suitable for protein labeling due to their hydrophilicity and photostability.
The specific selection of ATTO-dyes allows to address various experimental problems: The spectral properties of the five fluorophores allow, for example, their use in multiplexing with five colors (5-plex) as well as in FRET experiments with dye pairs or even FRET cascades.
Our "ATTO Spectral Kit" contains the five dyes ATTO 488, ATTO 542, ATTO 594, ATTO 643 and ATTO 700 as amine-reactive derivatives (0.5 mg NHS-ester each).
ATTO-TEC offers five new kits with selected ATTO-dyes in a set. With specially adapted quantities per dye, initial experiments can be carried out to test and select the most suitable fluorophores for the intended applications.
The following ATTO-kits are available for this purpose:
Test Kits
The combination of three dyes with similar absorption and fluorescence wavelengths enables our customers to easily find the most suitable ATTO-dye for their (labeling) application in the corresponding excitation range. Some of the dyes differ in terms of charge and linker, which means that different performance in different applications can be determined quickly and easily. Likewise, due to the slightly different spectral characteristics of the three dyes included, an optimized selection of the most suitable fluorophore can be made based on the filter sets or other device-specific parameters, e.g. in multiplexing applications, in order to minimize cross-talk and/or bleed-through or to enable the most effective excitation and/or detection.
The advantage of the kits on offer, which each contain a sufficient quantity of the three dyes to carry out several test reactions or experiments, is their lower price compared to ordering the three ATTO-dyes individually.
We offer four kits for the wavelength ranges of 500 nm, 550 nm, 600 nm and 640 nm, each containing 0.5 mg of amine-reactive derivative (NHS ester) of three well-known and proven ATTO dyes.
The kits are as follows:
| 500 nm | green | ATTO 488, ATTO Rho110, ATTO 514 |
| 550 nm | orange | ATTO 542, ATTO 550, ATTO 565 |
| 600 nm | red | ATTO 590, ATTO 594, ATTO Rho101 |
| 640 nm | deep red | ATTO 633, ATTO 643, ATTO 647N |
Spectral Kit
We have also put together an “ATTO Spectral Kit” containing five hydrophilic ATTO-dyes with absorption maxima in the wavelength range of 500 nm - 700 nm, thus covering the visible spectral range. These dyes are particularly suitable for protein labeling due to their hydrophilicity and photostability.
The specific selection of ATTO-dyes allows to address various experimental problems: The spectral properties of the five fluorophores allow, for example, their use in multiplexing with five colors (5-plex) as well as in FRET experiments with dye pairs or even FRET cascades.
Our "ATTO Spectral Kit" contains the five dyes ATTO 488, ATTO 542, ATTO 594, ATTO 643 and ATTO 700 as amine-reactive derivatives (0.5 mg NHS-ester each).
Show 1 to 5 (from a total of 5 products)